Timo Hildén
01.11.2016 · Timo Hildén

Comparison of EventBus and Android's Local Broadcasts

EventBus makes it possible to receive results on specific threads and is also easier on the keyboard because it requires you to write less boilerplate code.

GreenRobot’s EventBus has a number of benefits compared to local broadcasts. Like broadcasts, events are a tool for decoupling your application architecture, and they’re especially useful when handling responses to asynchronous requests. EventBus makes it possible to receive results on specific threads and is also easier on the keyboard because it requires you to write less boilerplate code.

Note that discussion here only concerns broadcasts sent using LocalBroadcastManager, i.e. broadcasts that are sent and received only within the same process. System-wide broadcasts sent using Context.sendBroadcast() are not covered.

There’s an accompanying example app on GitHub. The app explores only the performance of EventBus in relation to local broadcasts when sending multiple events/broadcasts in succession (i.e. in a for-loop). For single events/broadcasts sent only sporadically, performance of the event/broadcast delivery itself is a non-issue. Furthermore, you can usually rearrange your event delivery to happen in bigger batches if performance, CPU and battery usage is an issue (which is basically always :) Therefore, you should not base your decision whether to use the EventBus library on the example code alone.

Event delivery on specific threads

You can select whether to receive EventBus events on different threads based on the threadMode setting you (optionally) specify in the @Subscribe annotation, as described in the EventBus documentation. Make sure you check out the documentation, since threadMode behavior may not be immediately obvious based on the name alone. Here are some scenarios where you might want to choose a specific threadMode over others:

  • ThreadMode.POSTING The only mode that’s always guaranteed to be synchronous. You may want to use this e.g. to update the UI if you know you’re already on the main thread, or continue some background work on a worker thread. This is the default setting if you don’t specify the mode at all.
  • ThreadMode.MAIN You can use this to update the UI when work completes on a background thread.
  • ThreadMode.BACKGROUND For handling events on a dedicated worker thread one-by-one. When posting subsequent events from outside the worker thread while work is still ongoing, further requests will be queued. Note that if you’re already on the worker thread, any further events posted using this mode will be posted synchronously. If you need to post an event asynchronously from the event handler, consider using the ASYNC mode instead.
  • ThreadMode.ASYNC This option is useful when you need to handle multiple callbacks concurrently, like when executing multiple network requests. The calling thread is from a separate ThreadPool of worker threads, and never the posting thread. Remember to be careful with this in your event handler, since multiple threads may be executing the code asynchronously.

By contrast, BroadcastReceiver’s onReceive() is always called on the process’ main thread, unless you call sendBroadcastSync() from some other thread which, as the named implies, is executed directly.

Callback registration

To register callbacks that you want EventBus to call when certain types of event objects are posted, you specify the posted object type as parameter to your callback methods. You also need to register the object of the class where your callbacks are implemented. This is roughly equivalent to registering a broadcast receiver with a set of intent filters, as shown in this example:

public class MyActivity extends Activity { // …

    private MyReceiver myReceiver = new MyReceiver();
    private static final BROADCAST_ACTION = "BROADCAST_ACTION";

    @Override public void onStart() {
            .registerReceiver(myReceiver, new IntentFilter(BROADCAST_ACTION));

    @Override public void onStop() {

    @Subscribe public void onEvent(MyEvent event) {
        // Do stuff with received event …

    private static class MyReceiver extends BroadcastReceiver {
        @Override public void onReceive(Context context, Intent intent) {
            // Do stuff with received broadcast …

As you can see, writing a broadcast receiver is somewhat more cumbersome since you need to extend the BroadcastReceiver class and supply an intent filter, whereas you can just annotate your event handling methods with @Subscribe when using EventBus.

Posting events and broadcasts

This is an area where LocalBroadcastManager and EventBus are very similar to each other, without much boilerplate even with LocalBroadcastManager:

public void postEvent() {
    MyEvent event = new MyEvent();

public void sendBroadcast() {
    Intent intent = new Intent("my_action");

Delivering content

With broadcasts, you need to package your payload using intent extras, which can often require quite a bit of boilerplate code, especially when using Parcelables. With EventBus you can place your content within the event object itself. This requires no cumbersome packaging, no parcelables, etc. The content of the event you post is delivered as-is to the callback handler. Let’s expand the methods in the previous section to supply some payload as well:

class MyObject {
    public void doStuff() {
        // …

class MyEvent {
    int value;
    String text;
    MyObject myObject;

    public MyEvent(int value, String text, MyObject myObject) {
        this.value = value;
        this.text = text;
        this.myObject = myObject;

public void postEvent() {
    MyEvent event = new MyEvent(123, "abcdef", new MyObject());

public void sendBroadcast() {
    Intent intent = new Intent("my_action");
    intent.putExtra("int_extra", 123);
    intent.putExtra("text_extra", "abcdef);
    intent.putExtra("myobject_extra", new MyObject());

Passing the example instance of MyObject to a broadcast intent is not as simple as it looks, since the MyObject class needs to implement the Parcelable interface as specified in Android documentation. (Note that you should really use constant definitions for names of extras, they’re literals above only for conciseness and clarity.)

With EventBus, you can use the posted event directly in your callback handler, whereas with broadcasts you first need to unpack the payload from extras in your broadcast receiver:

public void onEvent(MyEvent event) {
    Log.d(TAG, "value: " + event.value);
    Log.d(TAG, "text: " + event.text);
    Log.d(TAG, "myObject.doStuff(): " + event.myObject.doStuff());

// …

private static class MyReceiver extends BroadcastReceiver {

public void onReceive(Context context, Intent intent) {
    int value = intent.getIntExtra("int_extra", -1);
    String text = intent.getStringExtra("text_extra");
    MyObject myObject = (MyObject) intent.getParcelable("myobject_extra");
    Log.d(TAG, "value: " + value);
    Log.d(TAG, "text: " + text);
    Log.d(TAG, "myObject.doStuff(): " + myObject.doStuff());


EventBus is a great library for decoupling your application architecture, delivering results on specific threads, and having to write no unnecessary boilerplate code when handling event payloads. While very convenient compared to simple local broadcasts, EventBus’ tradeoff comes in the lack of performance, although it’s still quite performant for most tasks. All things considered, for most intents and purposes EventBus is a very good choice due to its versatility.


Want to know more about this topic? Please leave your contact info and we'll get back to you.

Latest blog posts